[1] Chenyu Su, Jingjing Yang*, Tongbo Wei, Yihui Zhang, Peihua Yang, Jianxin Zhou. Numerical Simulation of the Thermal Behaviors for Two Typical Damping Alloys During Selective Laser Melting. Journal of Manufacturing Processes, 2023, 101: 1419-30.
[2] Jingjing Yang, Chunyang Zhao, Hailong Liang, Zemin Wang, Chenyu Su, Spinodal decomposition and martensitic transformation of the high manganese Mn–x Cu alloys fabricated by additive manufacturing. Applied Materials Today 25 (2021) 101170.
[3] Chenyu Su, Hanchen Yu, Zemin Wang, Jingjing Yang*, Xiaoyan Zeng, Controlling the tensile and fatigue properties of selective laser melted Ti-6Al-4V alloy by post treatment. Journal of Alloys and Compounds, 857 (2021) 157552.
[4] Jingjing Yang, Wang Yun, Tongbo Wei, Zemin Wang. A Comparable Study on Laser Welding Behaviors of Selective Laser Melted 304 Stainless Steel, Inconel 718 Superalloy and Ti-6Al-4V Alloy, 3D Printing and Additive Manufacturing. 2023.
[5] Jingjing Yang, Tongbo Wei, Chunyang Zhao, Hailong Liang, Zemin Wang, and Chenyu Su. Damping Properties of Selective Laser-Melted Medium Manganese Mn–xCu Alloy, 3D Printing and Additive Manufacturing. 2022.
[6] Jingjing Yang, Yun Wang, Fangzhi Li, Wenpu Huang, Guanyi Jing, Zemin Wang, Xiaoyan Zeng. Weldability, microstructure and mechanical properties of laser-welded selective laser melted 304 stainless steel joints. Journal of Materials Science & Technology, 2019, 35(9): 1817-1824.
[7] Jingjing Yang, Fangzhi Li, Aiqiong Pan, Huihui Yang, Chunyang Zhao, Wenpu Huang, Zemin Wang, Xiaoyan Zeng, and Xinliang Zhang. Microstructure and grain growth direction of SRR99 single-crystal superalloy by selective laser melting', Journal of Alloys and Compounds, 2019, 808: 151740.
[8] Huihui Yang, Jingjing Yang*, Wenpu Huang, Zemin Wang, Xiaoyan Zeng. Controllable in-situ aging during selective laser melting: stepwise precipitation of multiple strengthening phases in Inconel 718 alloy, Journal of Materials Science & Technology, 2019, 35: 1925-30.
[9] Jingjing Yang, Hanchen Yu, Huihui Yang, Fanzhi Li, Zemin Wang, Xiaoyan Zeng. Prediction of microstructure in selective laser melted Ti6Al4V alloy by cellular automaton. Journal of Alloys and Compounds, 748 (2018) 281-290.
[10] Jingjing Yang, Huihui Yang, Hanchen Yu, Zemin Wang, Hongze Wang, Xiaoyan Zeng. A novel approach to in-situ fabricate Ti-6Al-4V alloy with graded microstructure and property by selective laser melting, Materials Letters, 2018, 215: 246-49.
[11] Jingjing Yang, Hanchen Yu, Zemin Wang, Xiaoyan Zeng. Effect of crystallographic orientation on mechanical anisotropy of selective laser melted Ti-6Al-4V alloy. Materials Characterization, 127 (2017) 137‒145.
[12] Jingjing Yang, Huihui Yang, Hanchen Yu, Zemin Wang, Xiaoyan Zeng. Corrosion behavior of additive manufactured Ti-6Al-4V alloy in NaCl solution. Metallurgical and Materials Transactions A. 2017, 48: 3583-93.
[13] Jingjing Yang, Hanchen Yu, Jie Yin, Ming Gao, Zemin Wang, Xiaoyan Zeng. Formation and control of martensite in Ti-6Al-4V alloy produced by selective laser melting. Materials & Design, 108 (2016) 308‒318.
[14] Jingjing Yang, Jie Han, Hanchen Yu, Jie Yin, Ming Gao, Zemin Wang, Xiaoyan Zeng. Role of molten pool mode on formability, microstructure and mechanical properties of selective laser melted Ti-6Al-4V alloy. Materials & Design, 110 (2016) 558‒570.
[15] Jingjing Yang, Fangzhi Li, Zemin Wang, Xiaoyan Zeng. Cracking behavior and control of Rene 104 superalloy produced by direct laser fabrication. Journal of Materials Processing Technology, 225 (2015) 229‒239.
代表性专利
[1] 杨晶晶，胡耀武，张臣，苏晨昱. 三维增强形状记忆合金的激光选区冲击-增材复合制造方法. 2022-04-15. ZL202110619155.3.
[2] 杨晶晶，苏晨昱，胡耀武，张臣，魏童博. 形状记忆合金基复合智能材料及其制备方法. 2022-10-11. ZL202110651772.1.
[3] 王泽敏, 赵春阳, 喻寒琛, 梁海龙, 杨晶晶,曾晓雁. 一种高自由度复杂结构零件的增材制造装置及方法. 2023-08-29. ZL201910182390.1
[4] 骆汉宾, 杨晶晶, 刘世平, 李国卫, 徐捷, 安文博, 适用于建筑3D打印件表面质量的在线检测系统及方法. 2022-04-15. ZL202011056663.7.
[5] 王泽敏，杨晶晶，杨慧慧，喻寒琛，黄文普，曾晓雁. 一种金属增材制造构件质量在线无损检测系统及方法. 2019-11-22. ZL201710633175.X.
[6] 王泽敏，喻寒琛，杨晶晶，杨慧慧，黄文普，曾晓雁. 一种适用于铺粉式增材制造的预热方法以及装置. 2019-12-24. ZL201710611581.6.
[7] 王泽敏，张鹏，杨晶晶，杨慧慧，李祥友，曾晓雁. 一种激光选区熔化成形铺粉质量视觉在线检测方法及系统. 2019-07-19. ZL201710529138.4.
[8] 王泽敏，杨慧慧，杨晶晶，黄文普，靖冠乙，曾晓雁. 一种适用于铺粉式增材制造的质量无损在线检测装备及方法. 2019-07-19. ZL201710781210.2.
[9] 杨晶晶, 魏童博, 张臣, 胡耀武, 苏晨昱, 刘胜, 复合激光冲击和激光退火的金属增材制造的方法. 2022-09-02.CN114985767A.
[10] 杨晶晶,张溢辉,张臣,魏童博,苏晨昱,刘胜, 基于遗传算法和分子动力学性能数值分析的激光冲击-增材复合制造的工艺优化方法. 2023-08-30. 202310960034.4
(1) 国家自然科学基金委员会, 面上项目, 52275367, 基于激光选区冲击-激光增材复合制造技术制备NiTi形状记忆合金的功能行为调控研究, 2023-01-01 至 2026-12,主持
(2) 国家自然科学基金委员会, 青年科学基金项目, 51805186, 激光增材制造不同碳源颗粒增强Mn-Cu智能材料的阻尼机理和形状记忆行为, 2019-01-01 至 2021-12, 主持
(3) 华中科技大学武汉光电国家研究中心, 开放基金, 2021WNLOKF0009, 探测制导光学系统用Mn-Cu合金高精度格栅抑振结构的激光增材制造技术研究, 2022-01 至2024-12,主持
(4) 材料成形与模具技术国家重点实验室，开放课题，P2013-015，面向激光增材制造的微构型增强阻尼合金减振特性的结构功能一体化设计与建模研究，2022-01 至2024-12,主持
(5) 电子制造与封装集成湖北省重点实验室，开放课题，EMPI2023026，面向相控阵雷达钛合金封装材料激光焊接的结构与性能调控，2023-07 至2024-06,主持
(6) betway必威, 中央高校基本科研业务费专项资金青年教师资助项目, 2042021kf0033, 4D打印Mn-Cu基智能复合材料调幅分解和析出行为对性能的影响规律, 2021-01 至 2022-12,主持
(7) 湖北省博士后管理工作协调委员会, 湖北省博士后科技活动项目择优资助, 2017G39, 激光增材制造高锰型Mn-Cu合金的相变及阻尼行为, 2017-09 至 2019-06, 主持
(8) 中国博士后科学基金会, 中国博士后科学基金面上资助项目, 2017M620317, 激光增材制造高锰型Mn-Cu合金的相变及阻尼行为, 2017-09 至 2019-06, 主持
(9) 中国博士后科学基金会, 中国博士后基金特别资助项目, 2018T110759, 振荡增材制造碳颗粒增强Mn-Cu材料阻尼和形状记忆行为, 2018-02 至 2019-06, 主持
(10) 中国人民解放军总装备部, 中国国家重点基础研究项目计划(973项目), 613281, “XXX”（涉密）中“课题2”, 2016-01 至 2021-01, 参与
(11) 军委装备发展部, 装备预研领域基金项目, 6140923030101, 面向未来飞行器变体机翼结构的智能材料增材制造技术, 2018-01 至 2019-12, 参与
(12) 国防科工局, 技术基础科研项目, JSCG2016204B001, 四光束大尺寸激光选区熔化增材制造技术在XX复杂结构件上的推广应用研究, 2017-01 至 2018-12, 参与
